Lilly Electronics
Class A Amplifier Power Delay Soft Start Temperature Protection Board
Class A Amplifier Power Delay Soft Start Temperature Protection Board
Impossible de charger la disponibilité du service de retrait
Description:
This dedicated protection board is specially developed for Class A and high-power audio amplifiers, supporting a maximum power of 2000W.
The PCB is built with premium 1.6mm thick double-sided substrate, 2oz copper thickness and HASL soldering finish. The high-quality PCB material and reliable manufacturing process guarantee outstanding current-carrying performance, which can handle both low-level signal current and large working current stably.
Class A and high-power amplifiers are usually equipped with large power transformers, ultra-large filter electrolytic capacitors and low load impedance. When you turn on the amplifier directly, a huge instantaneous inrush surge current will be generated. This violent startup impact is very likely to burn out the rectifier bridge and shorten the service life of filter capacitors. This soft start board can effectively suppress the power-on surge current, greatly reduce the impact on the power circuit and extend the service life of your amplifier.
It comes with built-in heatsink temperature monitoring and overheat protection function. Once the detected temperature of the amplifier heatsink exceeds 75°C, the board will cut off the power supply immediately to prevent the amplifier from overheating and burning power tubes or other core components. The amplifier will remain locked and cannot be restarted until the heatsink temperature drops below 75°C, providing reliable safety protection for your valuable audio equipment.
Input voltage is optional between 110V and 220V to fit different mains power environments worldwide.
Board dimension: 78 * 87 * 32 mm
⚠️ Important Wiring Instruction:
Please solder the PP terminal to your required voltage, either 110V or 220V.
DO NOT connect 110V and 220V to the PP terminal at the same time, otherwise the board will be damaged.
Perfect for DIY audio enthusiasts, hi-fi project building, custom Class A power amplifier and high-power amplifier modification.
Package:
1x Class A Amplifier Power Delay Soft Start Temperature Protection Board
Partager

Tested in an audio setup and it performs reliably. No issues noticed during use.